Reaction kettle gear melt pump

The reaction kettle melt pump is particularly suitable for high-temperature and high viscosity polymer melt reaction transportation that requires high output pressure, such as resin, chemical fiber, and other industries. It is generally installed in the lower part of the reaction kettle and used as a feed pump. The reaction kettle gear pump has good self priming performance and can be applied to the transportation and pressurization of polymer materials under vacuum reaction conditions.

Reactor Booster Melt Pump

Technical parameters of reaction kettle gear melt pump

Transmission medium viscosity: 1~30000Pa • s

Suction pressure: vacuum vacuum~4MPa

Output pressure: 0-35MPa

Allowable pressure difference: 25MPa

Operating temperature: ≤ 350 ℃

Heating method: electric heating/thermal oil heating

Reaction kettle gear melt pump

Installation method of reaction kettle melt gear pump

The bottom pump is generally installed at the bottom of the reaction vessel and is driven by a motor, reducer, and universal coupling. The reaction vessel gear pump belongs to a positive displacement forced delivery pump, and the pump output flow can be adjusted by adjusting the pump speed. It is recommended to use frequency conversion speed regulation to achieve near linear flow output of the gear pump.

reactor kettle melt pump


Whatsapp: +86 158 38331071

pre:Small specification high-pressure discharge reactor kettle melt pump

next: Application and characteristics of universal electric heating extrusion melt gear pump

Copyright © 2012 All rights reserved Batte Melt Pump Co., Ltd. Site IndexProduct Index